Rispondi alla Discussione

Vi porto alla scoperta dell'unica zona rimasta "selvaggia" della Val di Fassa
Iscriviti al canale se non l'hai ancora fatto (clicca qui).

JavaScript è disabilitato. Per una migliore esperienza di navigazione attivalo nel tuo programma o nella tua app per navigare prima di procedere.

Testo: <blockquote data-quote="marmar" data-source="post: 580428" data-attributes="member: 7579">Ho scritto a TQ descrivendo il nostro problema(comune anche al tq60 che attualmente monto sulla mia domane+)Questa la risposta, ahimè, abbastanza inutilethank you for your message regarding your Trek Domane+. It is indeed irritating that the display deviates so significantly. Here are the most important points for technical classification: Power limitation: Since your bike was originally developed for the HPR50, the new HPR60 is limited via software to the original 300 W peak power. However, you still benefit from the higher torque of 60 Nm.Accuracy: Our sensors are primarily designed for a natural ride feel; the power display is a "by-product" and not as precise as a dedicated power meter.Check for error sources:Startup process: It is very important to always start the system without any pressure on the pedals, as the sensors calibrate themselves when booting up.Crank assembly: The crank arms must be aligned exactly with the markings (notches) on the spindle, otherwise incorrect values will be measured. Next steps: Please ask your dealer to connect the bike to our diagnostic tool (DST) to update the firmware and create a service report. If necessary, the dealer should create a service ticket to repair the bike if that is required.</blockquote>

Alto Basso